Park Med NYC Excellence in Women's Healthcare Logo


Video Follow-up


video follow-up

This service is Exclusively dedicated to our post-procedural patients.

We value the health and well-being of our patients before, during and long after scheduled appointments.

We are pleased to offer post-procedure video follow-up visits in the comfort of your home to minimize travel and exposure, during this time.

Your video visit will be with a Board-Certified Physician, affiliated with Parkmed NYC, and will consist of a detailed review of your symptoms. This unique evaluation will include use of your mobile phone and medical devices when needed.

If you have any questions, please be sure to ask your physician at the time of your virtual

How to prepare before your virtual visit:

You will need to download the Healow app.

Please click the link below for additional information on the Healow App

How to prepare for your video visit on the day of your appointment:

We recommend logging into your Patient Portal at least 10 minutes prior to your scheduled appointment time.

You will also receive an email notification as a reminder, titled, “ Telemed appointment reminder from your doctor’s office”

*Please be sure to complete the required questionnaire through the Healow patient portal*

Kindly take the pregnancy test which was provided to you upon discharge after your procedure. Please be sure to follow the instructions below on how to properly take the at home pregnancy test. We recommend you perform this test on the morning of your virtual visit. 


Allow the test strip, urine specimen and/or controls to equilibrate to room temperature (15-30°C/59-86°F) before testing.

  1. Remove the test strip from the sealed pouch and use it as soon as possible.
  2. With arrows pointing toward the urine specimen, immerse the test strip vertically in the urine specimen for at least 5 seconds. Do not pass the maximum line (MAX) on the test strip when immersing the strip. (See the illustration)
  3. Place the test strip on a non-absorbent flat surface, start the timer, and wait for the red line(s) to appear. The result should be read once 3 minutes have passed. It is important that the background is clear before the result is read.

Note: A low hCG concentration might result in a weak line appearing in the test region (T) after an extended period of time; therefore, do not interpret the result after 10 minutes.


(Please refer to the illustration above)

POSITIVE*: Two distinct red lines appear. One line should be in the control region (C) and another line should be in the test region (T).

NEGATIVE: One red line appears in the control region (C). No apparent red or pink line appears in the test region (T).

INVALID: Control line fails to appear. Insufficient specimen volume or incorrect procedural techniques are the most likely reasons for control line failure. Review the procedure and repeat the test with a new test strip. If the problem persists, discontinue using the test kit immediately and contact your local distributor.

*NOTE: The intensity of the red color in the test line region (T) will vary depending on the concentration of hCG present in the specimen. However, neither the quantitative value nor the rate of increase in hCG can be determined by this qualitative test.

Download Manufacturer Instructions

Your Health Is Everything

We are committed to compassion And Quality with a Patient-Friendly Approach